User's Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Video
- Network > General settings
- Network > Streaming protocols 
- Network > SNMP (Simple Network Management Protocol)
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Digital input
- Applications > Tampering detection
- Recording > Recording settings 
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
156 - User's Manual
URL Command Document for All SeriesIP8364
44
0(not support), 1(support)
Bit 6 => Support iris
operation;
0(not support), 1(support)
Bit 7 => External or built-in
PT; 0(built-in), 1(external)
Bit 8 => Invalidate bit 1 ~ 7;
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit;
Invalidate lens_pan, Lens_tilt,
lens_zoon, lens_focus,
len_iris.
0(fields are valid),
1(fields are invalid)
Examples:
PT8133: 0b1111
SD8362: 0b111111
VS8102: 0b10111101
windowless <boolean> 1 0/7 Indicate whether to support
windowless plug-in.
eptz 0, <positive
integer>
1 0/7 A 32-bit integer, each bit can
be set separately as follows:
Bit 0 => stream 1 supports
ePTZ or not.
Bit 1 => stream 2 supports
ePTZ or not.
The rest may be deduced by
analogy
npreset 0, <positive
integer>
20 0/7 Number of preset locations.
protocol_https < boolean > 1 0/7 Indicate whether to support
HTTP over SSL.
protocol_rtsp < boolean > 1 0/7 Indicate whether to support
RTSP.
protocol_sip <boolean> 0 0/7 Indicate whether to support
SIP.