User's Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Video
- Network > General settings
- Network > Streaming protocols 
- Network > SNMP (Simple Network Management Protocol)
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Digital input
- Applications > Tampering detection
- Recording > Recording settings 
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 155
URL Command Document for All SeriesIP8364
43
ndo 0,
<positive integer>
0 0/7 Number of digital outputs.
naudioin 0,
<positive integer>
0 0/7 Number of audio inputs.
naudioout 0,
<positive integer>
0 0/7 Number of audio outputs.
nvideoin <positive integer> 1 0/7 Number of video inputs.
nvideoinprofile <positive integer> 1 0/7 Number of video input
profiles.
nmediastream <positive integer> 2 0/7 Number of media stream per
channels.
nvideosetting <positive integer> 2 0/7 Number of video settings per
channel.
naudiosetting <positive integer> 0 0/7 Number of audio settings per
channel.
nuart 0,
<positive integer>
0 0/7 Number of UART interfaces.
nmotion 0, <positive
integer>
3 0/7 Number of motion window.
nmotionprofile 0, <positive
integer>
1 0/7 Number of motion profiles.
ptzenabled 0, <positive
integer>
0 0/7 An 32-bit integer, each bit can
be set separately as follows:
Bit 0 => Support camera
control function;
0(not support), 1(support)
Bit 1 => Built-in or external
video source;
0(external), 1(built-in)
Bit 2 => Support pan
operation, 0(not support),
1(support)
Bit 3 => Support tilt operation;
0(not support), 1(support)
Bit 4 => Support zoom
operation;
0(not support), 1(support)
Bit 5 => Support focus
operation;