User's Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Video
- Network > General settings
- Network > Streaming protocols 
- Network > SNMP (Simple Network Management Protocol)
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Digital input
- Applications > Tampering detection
- Recording > Recording settings 
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
146 - User's Manual
URL Command Document for All SeriesIP8364
34
percentage.
Less 0 <-> 100 More saturation
sharpnesspercent 0~100 50 4/4 Adjust sharpness of image by
percentage.
Softer 0 <-> 100 Sharper
gammacurve 0, 45 , 50,
60, 70, 80,
90, 100
0 4/4 Gamma curve.
dnr_mode 0~1 0 4/4 3D noise reduction.
0: off
1: on
dnr_strength 1~100 50 4/4 3D noise reduction strength.
1: low
50: medium
100: high
lowlightmode <boolean> 1 6/99 Enable/disable low light mode.
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile
setting
profile_i0_policy day,night,sch
edule
night 4/4 The mode which the profile is applied
to.
profile_i0_begintim
e
hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_brightne
ss
-5 ~ 5 -5 4/4 Adjust brightness of image according to
mode settings.
profile_i0_saturatio
n
-5~5,100 0 4/4 Adjust saturation of image according to
mode settings.
100 means using the parameter
“saturationpercent”.
profile_i0_contrast -5 ~ 5 0 4/4 Adjust contrast of image according to
mode settings.
profile_i0_sharpnes
s
-3~3,100 0 4/4 Adjust sharpness of image according to
mode settings.
100 means using the parameter
“sharpnesspercent”
profile_i0_saturatio
npercent
0 ~ 100 50 4/4 Adjust saturation of image by
percentage.
Less 0 <-> 100 More saturation
profile_i0_sharpnes 0~100 50 4/4 Adjust sharpness of image by