User's Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Video
- Network > General settings
- Network > Streaming protocols 
- Network > SNMP (Simple Network Management Protocol)
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Digital input
- Applications > Tampering detection
- Recording > Recording settings 
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
140 - User's Manual
URL Command Document for All SeriesIP8364
28
camera; 0 (external),
1(built-in)
Bit 2 => Support pan
operation; 0(not support),
1(support)
Bit 3 => Support tilt
operation; 0(not support),
1(support)
Bit 4 => Support zoom
operation; 0(not support),
1(support)
Bit 5 => Support focus
operation; 0(not support),
1(support)
text string[16] <blank> 1/4 Enclose caption.
imprinttimestamp <boolean> 0 4/4 Overlay time stamp on
video.
flickerless <boolean> 0 4/4 Enable flickerless mode or
not.
Enable flickerless mode will
limit the parameters:
minexposure and
maxexposure between
5~120.
minexposure 5,15,25,30,50,6
0,100,120,240,
250,480,500,10
00,2000,4000,8
000,16000,320
00
32000 4/4 Minimum exposure time.
maxexposure 5,15,25,30,50,6
0,100,120,240,
250,480,500,10
00,2000,4000,8
000,16000,320
00
30 4/4 Maximum exposure time.
enableblc 0~1 0 4/4 Enable backlight
compensation
s<0~(m-1)>_codectype mjpeg, h264 h264 1/4 Video codec type.