User`s manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings 
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
96 - User's Manual
PTZ > PTZ settings
Advanced Mode
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation.
The PTZ function allows users to quickly move the focus to a target area for close-up viewing
without physically zooming the camera.
Digital PTZ Operation (E-PTZ Operation)
Preset positions and rotation settings
In the PTZ settings page, you can create preset positions in the hemisphere covered by the sheye lens.
A total of 20 preset positions can be congured.
Please follow the steps below to congure preset positions and arrange them in a rotational tour through
different positions.
1. First select a video stream on which the PTZ settings will take place.
3
4
5
6
1
1
1
1
Zoom In
Zoom Out
2
7
8
9
1