User`s manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings 
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
178 - User's Manual
endtime hh:mm 24:00 6/6 End time of the weekly schedule.
(00:00~24:00 indicates schedule
always on)
prefix string[16] <blank> 6/6 Indicate the prefix of the
filename.
cyclesize 200~ 100 6/6 The maximum size for cycle
recording in Kbytes when
choosing to limit recording size.
reserveamount 0~ 100 6/6 The reserved amount in Mbytes
when choosing cyclic recording
mechanism.
dest cf,
0~4
cf 6/6 The destination to store the
recorded data.
“
cf” means local storage (CF or SD
card).
“0” means the index of the
network storage.
cffolder string[128] NULL 6/6 Folder name.
maxsize 100~2000 100 6/6 Unit: Mega bytes.
When this condition is reached,
recording file is truncated.
maxduration 60~3600 60 6/6 Uuit: Second
When this condition is reached,
recording file is truncated.
adaptive_enable 0,1 0 6/6 Indicate whether the adaptive
recording is enabled
adaptive_preevent 0~9 1 6/6 Indicate when is the adaptive
recording started before the event
trigger point (seconds)
adaptive_postevent 0~10 1 6/6 Indicate when is the adaptive
recording stopped after the event
trigger point (seconds)