User`s manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings 
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 143
7.6.7 RTSP
Subgroup of network: rtsp (capability.protocol.rtsp > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
port 554, 1025 ~
65535
554 1/6 RTSP port.
(capability.protocol.rtsp=1)
anonymousviewing <boolean> 0 1/6 Enable anoymous streaming
viewing.
authmode disable,
basic,
digest
basic 1/6 RTSP authentication mode.
(capability.protocol.rtsp=1)
s0_accessname string[32] live.sdp 1/6 RTSP access name for stream1.
(capability.protocol.rtsp=1 and
capability.nmediastream > 0)
s1_accessname string[32] lives2.sdp 1/6 RTSP access name for stream2.
(capability.protocol.rtsp=1 and
capability.nmediastream > 1)
s2_accessname string[32] lives3.sdp 1/6 RTSP access name for stream3
(capability.protocol.rtsp=1 and
capability.nmediastream > 2)
s3_accessname string[32] live2.sdp 1/6 RTSP access name for stream4
(capability.protocol.rtsp=1 and
capability.nmediastream > 3)
s4_accessname string[32] live2s2.sdp 1/6 RTSP access name for stream5
(capability.protocol.rtsp=1 and
capability.nmediastream > 4)
s5_accessname string[32] live2s3.sdp 1/6 RTSP access name for stream6
(capability.protocol.rtsp=1 and
capability.nmediastream > 5)
s0_audiotrack <boolean> -1 7/6 Enable audio for stream1.
s1_audiotrack <boolean> -1 7/6 Enable audio for stream2.
s2_audiotrack <boolean> -1 7/6 Enable audio for stream3.
s3_audiotrack <boolean> -1 7/6 Enable audio for stream4.
s4_audiotrack <boolean> -1 7/6 Enable audio for stream5.
s5_audiotrack <boolean> -1 7/6 Enable audio for stream6.