Installation guide

- 15 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
“Mute” Disable audio at client side.
“Record” This option will tart MP4 recording.
The pan/tilt control buttons:
The direction buttons are for Left, Right, Up, Down, and Home functions. The Home
button centers the camera.
“Go to” Once the Administrator has determined the preset positions; the User can
aim the camera using this control.
“Pan speed”
This button sets the moving range of the “Left” and “Right” commands.
“Tilt speed”
This button sets the moving range of the “Up” and “Down” commands.
“Pan”
This button commands the camera to pan from the current position to the left-most
and then to the right-most position. After panning, the camera returns to the original
position.
“Patrol”
This button commands the camera to patrol between the preset positions on the
Patrol List, which can be modified on the “Camera control page”. After one patrol
cycle, the camera returns to the original position.
“Stop” This stops the “Auto Pan” command or “Auto Patrol” command.
Privacy Mode
The privacy button, located on the lower part of the camera body, is used to turn off
the streaming media at the clients. This helps to protect people’s privacy when they do
not want to be seen by the camera. When the privacy mode is activated, the Status
LED blinks in blue. To disable it, press the privacy button again.