User's Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings 
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- Applications > Panoramic PTZ
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
72 - User's Manual
Media > Video
FOV
The Field of View window allows you to select either the Fisheye mode or a 1080P Full HD mode.
The 1080P Full HD mode provides a dewarpped section (1920x1080 pixels) out of the 180 degrees
hemispheric view. The 1080P Full HD mode provides a higher frame rate of up to 30fps. It is as if using
the sheye camera as a standard xed dome camera with a wide view angle.
In the 1080P Full HD mode, regional and panoramic view modes will not be available. Also, changing the
FOV option will erase the motion detection, privacy mask, and preset postions you previously congured.
180°
117°
1080P Full HD
window
Hemispheric
view
Below is a conceptual drawing showing the coverage of the 1080P Full HD mode.
NOTE:
If the FOV 1080P mode is selected, the Local dewarp function will not be available.