User's Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings 
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- Applications > Panoramic PTZ
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
240 - User's Manual
Return code: clickimg_return="$Error_code"
Error code Code - Hexa Code - Decimal Description SysLog message
CLICKIMG_SUCCESS 0x000000C8 200
Success to
control
auxiliary
camera
ERR_CONNECTION 0x000001F4 500
Controller
camera
connect to
auxiliary
camera fail.
PPTZ_Connection fail
ERR_UNSUPPORT_POS 0x000001F5 501
Controller
camera can't
get the
correspond
position
from
mapping
table.
PPTZ_Unsupported position
ERR_MODULE_DISABLE 0x000001F6 502
Panoramic
PTZ function
is disable
PPTZ_Function is disabled
ERR_INVALID_CAM_ID 0x000001F7 503
Invalid
auxiliary
camera id.
PPTZ_Invalid auxiliary camera
ID
ERR_INVALID_FORMAT 0x000001F8 504
Invalid CGI
command, if
you lost any
one of the
required
parameter, it
will cause
fail.
PPTZ_Invalid cgi command
format