User's Manual

VIVOTEK
196 - User's Manual
uart_httptunnel <boolean> 0 0/7 Indicate whether to support HTTP
tunnel for UART transfer.
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to support Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to support wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to support wireless
802.11g.
wireless_encrypt_we
p
<boolean> 0 0/7 Indicate whether to support wireless
W E P.
wireless_encrypt_wp
a
<boolean> 0 0/7 Indicate whether to support wireless
WPA.
wireless_encrypt_wp
a2
<boolean> 0 0/7 Indicate whether to support wireless
WPA2.
wireless_beginchann
el
1 ~ 14 255 0/7 Indicate the begin channel of wireless
network
wireless_endchannel 1 ~ 14 255 0/7 Indicate the end channel of wireless
network
derivative_brand <boolean> 1 0/7 Indicate whether to support the
upgrade function for the derivative
brand. For example, if the value is
true, the VVTK product can be
upgraded to VVXX. (TCVV<->TCXX is
excepted)
npreset 0, <positive integer> 20 0/7 Number of preset locations
eptz 0, <positive integer> 7 0/7 A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or
not.
Bit 1 => stream 2 supports ePTZ or
not.
The rest may be deduced by analogy
nanystream 0, <positive integer> 0 0/7 number of any media stream per
channel
iva <boolean> 0 0/7 Indicate whether to support Intelligent
Video analysis