User's Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings 
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- Applications > Panoramic PTZ
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix

VIVOTEK
User's Manual - 195
dependent> depend
ent>
videoout_codec <a list of the
available codec types
separated by
commas)
<product
dependent>
<blank> 0/7 Available codec list.
audio_aec <boolean> 0 0/7 Indicate whether to support acoustic
echo cancellation.
audio_extmic <boolean> 1 0/7 Indicate whether to support external
microphone input.
audio_linein <boolean> 1 0/7 Indicate whether to support external
line input.
(It will be replaced by audio_mic and
audio_extmic.)
audio_lineout <boolean> 1 0/7 Indicate whether to support line
output.
audio_headphoneout <boolean> 0 0/7 Indicate whether to support
headphone output.
audioin_codec aac4, g711, g726
<product
dependent>
aac4,
g711,
g726
0/7 Available codec list for audio input.
audioout_codec g711
<product
dependent>
0/7 Available codec list for SIP.
camctrl_httptunnel <boolean> 0 0/7 Indicate whether to support
httptunnel.
camctrl_httptunnelcl
ient
<boolean> 0 0/7 Indicate whether to support httptunnel
client.
camctrl_privilege <boolean> 1 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the Security
page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi