User's Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings 
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- Applications > Panoramic PTZ
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 137
3. On the General settings pane, select both the "Enable Panoramic PTZ" and "Enable Auto
tracking" checkboxes.
4. The Auxiliary camera information and the Controller camera account provide conguration
options to the partner cameras in case that their IP addresses may be changed after the initial
conguration. Use of static IPs is highly recommended in a Panoramic PTZ conguration.
The Test button can be used to test the connectivity between the Controller and the Auxiliary
cameras.
Proceed with the following if you prefer recording the video while the speed dome is tracking
an object:
4-1. Select one or more manual trigger checkboxes, and click Save.
4-2. Open a web console with the "Auxiliary" speed dome camera.
4-3. Open the Event settings page through Conguration > Event > Event settings.
4-4. Click Add to create a new event setting.