user manual
Table Of Contents
- Overview
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
58 - User's Manual
Stream settings
This Network Camera supports multiple streams with frame sizes ranging from
176 x 144 to 1280 x 1024 (IP8355EH)
- or -
176 x 144 to 1920 x1080 (IP8365EH).
The denition of multiple streams:
■ Stream 1: The default frame size for Stream 1 is set to the 1280 x 1024 at 30fps.
■ Stream 2: The default frame size for Stream 2 is set to the 640 x 480 at 15fps.
Media > Video
IMPORTANT:
1. When selecting a different resolution for a video stream, a smaller resolution with a
different aspect ratio will be proportionally generated from the original field of view.
However, some resolutions, e.g., the 1280x720, has an aspect ratio of 16:9; which is
different from the default 5:4 ratio. To maintain the aspect ratio in the display, some areas
on the sides of the eld of view will be left out.
2. The Customized frame rate number is not congurable.
3. If manually configuring the Fixed quality value for a video stream using the Customized
method, the lowest quality number is 10.