User Manual
Table Of Contents
- Read Before Use
- Overview
- Hardware Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- ■ Smart stream III
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL/TLS)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
288 - User's Manual
version number (httpversion) is equal
or greater than 0302a.
* Only available when
"capability_image_c<0~(n-1)>_sens
ortype" is "smartsensor"
Group: capability_peripheral_c<0~(n-1)> n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
devicecontrol <boolean> 0/7 Indicate whether to support the peripheral
device control.
* We support this parameter when the version
number (httpversion) is equal or greater than
0305c.
washer_support <boolean> 0/7 Indicate whether to support the washer system
which can clean the protective window.
* Only available when
"capability_peripheral_c<0~(n-1)>_
devicecontrol" is 1
washer_mode wiper,
washer
0/7 Available options for
"camclean_c<0~(n-1)>_washer_mode"
* Only available when
"capability_peripheral_c<0~(n-1)>_washer_su
pport" is 1
heater_support <boolean> 0/7 Indicate whether to support heater.
* Only available when
"capability_peripheral_c<0~(n-1)>_
devicecontrol" is 1