User Manual

VIVOTEK
User's Manual - 57
Image settings
On this page, you can tune the White balance and Image adjustment settings.
White balance: Adjust the value for the best color temperature.
■ Select one of the white balance modes:
1. Auto (system default): This mode comes with a temperature ranging 2500K~7500K. This mode is
balanced for any lighting conditions.
2. Outdoor: Using this mode enables the camera to capture images with natural white balance
observable in the morning, with a temperature ranging 2000K~ 10000K.
2. Indoor: This mode applies to most of the indoor lighting conditions, with a temperature ranging
5500K~6500K.
■ Fix current value: This option is available when the tuning the white balance. When selected, the
camera will use the current color temperature setting (the current color temperature you selected, e.g.,
from other modes). Note that you should use the Save button below to preserve current conguration.
Otherwise, the white balance mode will return to Auto after you leave the conguration page.
■ Manual: In the manual mode, you can manually tune the R gain and Blue gain values by dragging the
slide bars. Index numbers will be shown on the right hand side while changes in image is immediately
displayed.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from 0% to 100% .
■ Contrast: Adjust the image contrast level, which ranges from 0% to 100%.
■ Saturation: Adjust the image saturation level, which ranges from 0% to 100%.
■ Sharpness:
Adjust the image sharpness level, which ranges from 0% to 100% .
Sensor Setting 1:
For normal situations
Defog: Defog helps improve the visibility quality of captured image in poor weather conditions such as
smog, fog, or smoke.