User Manual
Table Of Contents
- Overview
- Hardware Installation
- Accessing the Network Camera
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Audio detection
- Applications > Package management (VADP - VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
20 - User's Manual
In-ceiling Mount - Mount Option C
C-1. The in-ceiling mount bracket is separately purchased. Apply the alignment sticker to a
preferred location. Drill a hole that is 200mm in diameter. The maximum board thickness is
63mm. Make sure the ceiling board can stand the weight of the camera (1.2kgs).
Ø200mm
63mm
Up to
Ceiling Hole Template Sticker
260mm
C-2. Secure the included clamping arms to the sides of the camera. When doing this, use the
included foam block to help avoid scratch and damage.
x3