User Manual
Table Of Contents
- Overview
- Hardware Installation
- Accessing the Network Camera
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > DDNS
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Audio detection
- Applications > Package management (VADP - VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 189
(Available options
are list in
"capability_image_c
<n>_exposure_mo
detype")
Shutter Speed, auto Iris and Gain.
"irispriority": Adjust with variable Iris, auto
Gain and Shutter speed.
"manual": Adjust with variable Shutter, Iris
and Gain.
* We support this parameter when the version
number (httpversion) is equal or greater than
0302a.
whitebalance
<product dependent>
auto,
manual,
rbgain,
widerange,
outdoor,
indoor,
sodiumauto,
etc
(Available values are
listed in
"capability_image_c
<n>_wbmode")
4/4 Modes of white balance.
"auto": Auto white balance
"rbgain": Use rgain and bgain to set white
balance manually.
"manual": 2 cases:
a. if "rbgain" is not supported, this means
keep current white balance status.
b. if "rbgain" is supported, "rgain" and
"bgain" are updated to the current values
which is got from white balance module. Then,
act as rbgain mode
"widerange": Auto Tracing White balance
(2000K to 10000K).
"outdoor": auto white balance mode
specifically for outdoor.
"indoor": auto white balance mode
specifically for indoor.
"sodiumauto": sodium vapor lamps.
* Only available when
"capability_image_c<n>_wbmode" !="-"
rgain 0~100 4/4 Manual set rgain value of gain control setting.
0: Weak <-> 100: Strong
* Only available when "rbgain" is listed in
"capability_image_c<n>_wbmode".
* Only valid when
"videoin_c<n>_whitebalance" != auto
* Normalized range.
bgain 0~100 4/4 Manual set bgain value of gain control setting.
0: Weak <-> 100: Strong










