User`s manual

VIVOTEK
User's Manual - 9
Installation - for the Conguration w/ Ex-
tended Cables
Hardware Installation
HD WDR Pro
IMPORTANT:
If your camera comes without the dehumidier, you
should examine whether the color of the silica gel inside
the chassis has turned dark. If so, you should replace
the desiccant bag.
To replace the desiccant bags:
1. Remove the dome cover by loosening 4 T25 anti-
tamper screws.
2. Replace the desiccant bags by attaching them rmly
to the inside of the chassis.
3. Re-install the dome cover.
Also note the following:
1. Do not install the camera in a raining day.
2. It takes approximately 2 days to suppress the
moisture level to 30% or lower, either using the
desiccant bags or the dehumidier.
3. Condensation may still be observed from on the
dome cover within 30 minutes.