English Warning Before Installation Power off the Network Camera as soon as smoke or unusual odors are detected. Refer to your user’s manual for the operating temperature. Contact your distributor in the event of occurrence. Do not disassemble the Network Camera. Do not touch the Network Camera during a lightning storm. Do not insert sharp or tiny objects into the Network Camera. Do not drop the Network Camera. Do not manually pan and tilt the Network Camera when the power is on.
1 Package Contents SD8311E/21E/12E/22E/13E/23E Wall Mount Bracket GND DO2 DO1 DO+ GND D13 D12 D11 Moisture Absorber / Metal Ring O-ring and Screws / Alignment Sticker Silica gel Silica gel RJ45 Female/Female Coupler Quick Installation Guide Warranty Card Software CD 510000202G Black & Clear Dome Covers EN-2
English 2 Physical Description Inner View SD/SDHC Card Slot Status LED Reset Button Lens Outer View GND DO2DO1DO+ D GN 2DO 1DO + DO GND D13 D12 D11 GND D13 D12 D11 General I/O Terminal Block Ethernet 10/100 RJ45 Plug Audio Out (green) Microphone In (pink) Power Cord Socket (black) Ground EN-3
3 Hardware Installation Mounting the Network Camera 1. Attach the alignment sticker to the wall. 2. Drill four pilot holes into the wall. 3. Attach the black cover to the Network Camera using the supplied four black screws. 4. Stick the supplied two pieces of moisture absorber symmetrically to the inner side of the dome cover. Then place the metal ring into the dome cover to fix the moisture absorber. 5. Fix the dome cover to the Network Camera and secure it by rotating it clockwise. 6.
English 4 Network Deployment General Connection (without PoE Plus) 1. If you have external devices such as sensors and alarms, connect them to the general I/O terminal block. GND DO2DO1DO+ GND DI3 DI2 DI1 GND: Ground DO2: Digital Output 2 DO1: Digital Output 1 DO+: Digital Outupt (DC12V) GND: Ground DI3: Digital Input 3 DI2: Digital Input 2 DI1: Digital Input 1 2. Use the supplied RJ45 female/female coupler to connect the Network Camera to a switch.
5 Assigning IP Address 1. Install "Installation Wizard 2" from the Software Utility directory on the software CD. 2. The program will conduct an analysis of your network environment. After your network is analyzed, please click on the "Next" button to continue the program. IW2 Installation Wizard 2 3. The program will search for VIVOTEK Video Receivers, Video Servers, and Network Cameras on the same LAN. 4. After a brief search, the main installer window will pop up.
English 6 Ready to Use 1. A browser session with the Network Camera should prompt as shown below. 2. You should be able to see live video from your camera. You may also install the 32channel recording software from the software CD in a deployment consisting of multiple cameras. For its installation details, please refer to its related documents. For further setup, please refer to the user's manual on the software CD.
