Specifications
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
94 - User's Manual
Parameter Value Description
addpos
<Text string less than 30
characters>
Add one preset location to preset list�
channel <0~(n-1)> Channel of video source
delpos
<Text string less than 30
characters>
Delete preset location from preset list�
return <return page>
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according to the current path� If you omit this
parameter, it will redirect to an empty page�
IP ltering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/iplter.cgi?method=<value>&[start=<ipaddress>&end=<ipaddress>]
[&index=<value>][&return=<return page>]
Parameter Value Description
Method
addallow
Add a set of allow IP address range to server� Start and
end parameters must be specified� If the index parameter is
specified, it will try to add starting from index position�
adddeny
Add a set of deny IP address range to server� Start and
end parameters must be specified� If the index parameter is
specified, it will try to add starting from index position�
deleteallow
Remove a set of allow IP address range from server� If
start and end parameters are specified, it will try to remove
the matched IP address� If index is specified, it will try to
remove the address from given index position� [start, end]
parameters have higher priority than the [index] parameter�
deletedeny
Remove a set of deny IP address range from server� If
start and end parameters are specified, it will try to remove
the matched IP address� If index is specified, it will try to
remove the address from given index position� [start, end]
parameters have higher priority than the [index] parameter�
start <ip address> The start IP address to add or to delete�
end <ip address> The end IP address to add or to delete�
index <value> The start position to add or to delete�
return <return page>
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according to the current path� If you omit this
parameter, it will redirect to an empty page�