Specifications

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
84 - User's Manual
protocol_rtp_
multicast_
backchannel
<boolean> 0/7 Indicate whether to support backchannel multicast
protocol_rtp_tcp <boolean> 0/7 Indicate whether to support rtp over tcp
protocol_rtp_http <boolean> 0/7 Indicate whether to support rtp over http
protocol_spush_
mjpeg
<boolean> 0/7 Indicate whether to support server push motion jpeg
protocol_snmp <boolean> 0/7 Indicate whether to support snmp
videoin_type
0,
1,
2
0/7
0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_
resolution
<a list of the
available
resolution
separates by
comma>
0/7 Available resolutions list
videoin_codec
<a list of the
available codec
types separaters
by comma>
0/7 Available codec list
videoout_codec
<a list of the
available codec
types separaters
by comma>
0/7 Available codec list
audio_aec <boolean> 0/7 Indicate whether to support acoustic echo cancellation
audio_extmic <boolean> 0/7 Indicate whether to support external microphone input
audio_linein <boolean> 0/7 Indicate whether to support external line input
audio_lineout <boolean> 0/7 Indicate whether to support line output
audio_
headphoneout
<boolean> 0/7 Indicate whether to support headphone output
audioin_codec
<a list of the
available codec
types separaters
by comma>
0/7 Available codec list
audioout_codec
<a list of the
available codec
types separaters
by comma>
0/7 Available codec list
uart_httptunnel <boolean> 0/7 Indicate whether to support the http tunnel for uart transfer
transmission_
mode
Tx, Rx 0/7
Indicate what kind of transmission mode the machine used. TX:
server, Rx: receiver box
network_wire <boolean> 0/7 Indicate whether to support the Ethernet
network_wireless <boolean> 0/7 Indicate whether to support the wireless
wireless_
802dot11b
<boolean> 0/7 Indicate whether to support the wireless 802�11b+
wireless_
802dot11g
<boolean> 0/7 Indicate whether to support the wireless 802�11g
wireless_
encrypt_wep
<boolean> 0/7 Indicate whether to support the wireless WEP
wireless_
encrypt_wpa
<boolean> 0/7 Indicate whether to support the wireless WPA
wireless_encrypt
_wpa2
<boolean> 0/7 Indicate whether to support the wireless WPA2