Specifications

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 47
Camera control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation by a control
panel�
Preset Position
In this page, you can set preset positions for the Network Camera� You can also select some
preset positions for it to partol. A total of 128 preset positions can be congured.
Follow the steps below to set a preset position:
1� Adjust the Network Camera to a desired position using the buttons on the right side of the window�
Click Set as home or Default home to dene your home denition.
2� In the Preset position name text box, enter a descriptive name for the preset position� The preset
position name allows up to forty characters� Click Add to take effect�
3� To remove a preset position from the list, select a preset position name from the Preset Positions drop-
down list , then click Delete�
4� Click Save to take effect�
For example:
Dwelling time (sec)
Set the stop time of each preset location during auto patrol of the network camera�