Specifications

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 29
NOTE
► In order to comply with IEC 60950-1 regulations, DO NOT connect the LAN ports to other devices
(such as a PC) unless for the initial setup. These LAN ports are designed for camera connections, and
come with PoE power through the lines, which may impose unpredictable problems when connected
to a non-PoE device. Although PoE detection circuits have been implemented with these ports, it is
best to avoid the connections to devices other than PoE cameras.
►The LAN ports should be connected only to PoE networks without routing to the outside plants.
WARNING!
► The “Network” conguration page provides congurable options for the NVR’s WAN port.
The “LAN” conguration page provides network conguration options for the 4 or 8 LAN ports, and
usually you do not need to change its conguration.
► Please do not confuse the two different conguration pages and create identical settings on these two
pages. Doing so will produce network problems.
Config. for WAN port
Config. for LAN ports