User`s manual

VIVOTEK
User's Manual - 19
Attach the dome cover to camera. Secure
the dome screws with the supplied
screwdriver. Finally, make sure all parts of
the camera are securely installed.
IMPORTANT:
Please secure the screws tightly to
avoid moisture.
Completion
Open the aluminum foil vacuum bag and
take out the desiccant bag. Attach the
supplied desiccant bag to the inner side of
the dome cover, to under the retainer clip.
(Please replace the desiccant whenever you
open the dome cover.)
Retainer
clip
Desiccant
bag
4
7
8
4. Use the adjustment tool to adjust the
lens focus by rotating the lens clockwise
or counter-clockwise.
5. Rotate the lens module back to the
correct orientation. Put on the dome
cover, but do not completely tighten its
screws yet.
6. Check the live console to see if the
image is clear. Repeat the process until
the live image is clear.
7. Tighten the lens focus retention screw.
8. Tighten the lens module retention
screw.