User`s manual

VIVOTEK
User's Manual - 11
1 DI-
2 DI+
3 DO-
4 DO+
5 Audio GND
6 Audio Out
2. Use a small-size at-blade screwdriver to secure IO wires to the included terminal
blocks.
The pinouts are shown below.
Screw: M2
3. Connect the terminal block to the camera.
NOTE:
1. This equipment is only to be connected to PoE networks without routing to outside
plants.
2. For PoE input connection, use only UL listed I.T.E. with PoE output.