User Manual

VIVOTEK
User's Manual - 347
© 2019 VIVOTEK INC. All Right Reserved
212
7.36 ePTZ Setting
Group: eptz_c<0~(n-1)> for n channel product. (capability_eptz > 0 or capability_fisheye = 1)
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
osdzoom
<Not recommended to
use this>
<boolean>
1/4
Indicates multiple of zoom in is
“on-screen display” or not.
* Reserved for compatibility, and suggest
don't use this since [httpversion] > 0302a
* We replace
"eptz_c<0~(n-1)>_osdzoom" with "
videoin_c<0~(n-1)>_zoomratiodisplay".
smooth
<boolean>
1/4
Enable the ePTZ "move smoothly"
feature
tiltspeed
-5 ~ 5
1/4
Tilt speed
* Only available when
"capability_fisheye" is 1
1/7
Tilt speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
panspeed
-5 ~ 5
1/4
Pan speed
* Only available when
"capability_fisheye" is 1
1/7
Pan speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
zoomspeed
-5 ~ 5
1/4
Zoom speed
* Only available when
"capability_fisheye" is 1
1/7
Zoom speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
autospeed
1 ~ 5
1/4
Auto pan/patrol speed
* Only available when
"capability_fisheye" is 1
© 2019 VIVOTEK INC. All Right Reserved
213
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
rotatespeed 1 ~ 5 1/4 Rotate speed (only for Fisheye series)
* Only available when
"capability_fisheye" is 1 and
"capability_fisheyelocaldewarp_c<0~(n-1
)>" is 0
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the index of video stream
which support ePTZ if capability_eptz > 0; m is the index of stream number if capability_fisheye = 1.
(capability_eptz > 0 or capability_fisheye = 1)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
patrolseq string[120] 1/4 The patrol sequence of ePTZ. All the
patrol position indexes will be separated
by ","
patroldwelling string[160] 1/4 The dwelling time (unit: second) of each
patrol point, separated by “,”.
preset_i<0~19>_name string[40] 1/4 Name of ePTZ preset.
* Only available when
"capability_fisheye" is 1
1/7 Name of ePTZ preset.
(It should be set by ePreset.cgi rather
than by setparam.cgi.)
preset_i<0~19>_pos < W,H >
<product
dependent>
1/4 Left-top corner coordinate of the preset.
* Only available when
"capability_fisheye" is 1
1/7 Left-top corner coordinate of the preset.
(It should be set by ePreset.cgi rather
than by setparam.cgi.)
preset_i<0~19>_size <WxH>
<product
dependent>
1/4 Width and height of the preset.
* Only available when
"capability_fisheye" is 1