User Manual
Table Of Contents
- Overview
- Ready to Use
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- PTZ
- Mechanical PTZ Operation
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Shock detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Storage > Storage management
- Storage > Content management
- Appendix
VIVOTEK
User's Manual - 343
© 2019 VIVOTEK INC. All Right Reserved
208
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
adaptive_enable
<boolean>
6/6
Indicate whether the adaptive
recording is enabled
adaptive_preevent
0~9
6/6
Indicate when is the adaptive recording
started before the event trigger point
(seconds)
adaptive_postevent
0~10
6/6
Indicate when is the adaptive recording
stopped after the event trigger point
(seconds)
7.33 HTTPS
Group: https (capability_protocol_https > 0)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
6/6
To enable or disable secure HTTP.
policy
<Boolean>
6/6
If the value is 1, it will force HTTP
connection redirect to HTTPS
connection
method
auto,
manual,
install
6/6
auto =>Create self-signed certificate
automatically.
manual =>Create self-signed certificate
manually.
install =>Create certificate request and
install.
status
-3 ~ 1
6/6
Specify the https status.
-3= Certificate not installed
-2 = Invalid public key
-1 = Waiting for certificate
0= Not installed
1 = Active
countryname
string[2]
6/6
Country name in the certificate
information.
stateorprovincen
ame
string[128]
6/6
State or province name in the
certificate information.
localityname
string[128]
6/6
The locality name in thecertificate
information.
© 2019 VIVOTEK INC. All Right Reserved
209
NAME VALUE SECURITY
(get/set)
DESCRIPTION
organizationname string[64]
VIVOTEK Inc.
6/6 Organization name in the certificate
information.
unit string[64]
VIVOTEK Inc.
6/6 Organizational unit name in
thecertificate information.
commonname string[64]
www.vivotek.com
6/6 Common name in the certificate
information.
validdays 0 ~ 3650 6/6 Valid period for the certification.
7.34 Storage Management Setting
Group: disk_i<0~(n-1)> n denotes the value of "capability_storage_management_ndevice"
(capability_storage_management_ndevice > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
cyclic_enabled <boolean> 6/6 Enable cyclic storage method.
cyclic_reserve 10 ~ 99 6/6 The reserved percentage of this disk.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
type sd, nas
<product
dependent>
6/7 The storage device type.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
autocleanup_mode targetbase,
sourcebase
6/6 Specify the automatic clean up method
for storage devices, where “targetbase”
indicate the automatic clean up is based
on the attached devices such as nas or sd
card, whereas “sourcebase” indicate
automatic clean up is based on the
selected recording track.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.