User Manual

VIVOTEK
User's Manual - 233
© 2019 VIVOTEK INC. All Right Reserved
98
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
Spatical mode provides the best
image quality, while Blend mode
provides better image quality (than
not using the deinterlace function at
all).
* Only available when
"capability_image_c<0~(n-1)>_deinter
lace_support" is 1.
xoffset
0~100
4/4
Adjusting the image to proper
position horizontally.
* Only available when the bit 4 of
capability_image_c<0~(n-1)>_basicset
ting is 1.
yoffset
0~100
4/4
Adjusting the image to proper
position vertically.
* Only available when the bit 5 of
capability_image_c<0~(n-1)>_basicset
ting is 1.
lens_alignment
0~100
4/4
Stitch the sensors together into
focused position.
* Only available when
"capability_image_c<0~(n-1)>_lens_al
ignment" is 1.
lens_ldc_mode
<boolean>
4/4
Enable/disable lens distortion
correction.
* Only available when
"capability_image_c<0~(n-1)>_lens_ld
c_support" is 1.
palette_mode
Available value is
listed in
"capability_image_c<
0~(n-1)>_palette_mo
de"
1/4
Set color palette option.
* Only available when
"capability_image_c<0~(n-1)>_palette
_support" is 1.
* Not support "policy=day" anymore
when the version number
© 2019 VIVOTEK INC. All Right Reserved
99
NAME VALUE SECURITY
(get/set)
DESCRIPTION
(httpversion) is equal or greater than
0310a.
profile_i<0~(m-1)>
_enable
<boolean> 4/4 Enable/disable this profile setting
profile_i<0~(m-1)>
_policy
night,
schedule
4/4 The mode which the profile is applied
to.
* Not support "policy=day" anymore
when the version number
(httpversion) is equal or greater than
0301a.
profile_i<0~(m-1)>
_begintime
hh:mm 4/4 Begin time of schedule mode.
profile_i<0~(m-1)>
_endtime
hh:mm 4/4 End time of schedule mode.
profile_i<0~(m-1)>
_brightness
<Not
recommended to
use this>
-5~5,100 4/4 -5: Darker <-> 5: Bright
100: Use "
image_c<0~(n-1)>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1
* We replace "profile_i0_brightness"
with "profile_i0_brightnesspercent".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
profile_i<0~(m-1)>
_contrast
<Not
recommended to
use this>
-5~5,100 4/4 -5: Less contrast <-> 5: More contrast
100: Use "
image_c<0~(n-1)>_contrastpercent"
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.