User Manual

VIVOTEK
User's Manual - 227
© 2019 VIVOTEK INC. All Right Reserved
92
equal or greater than 0312a.
builtin_whiteled_enable
d
<boolean>
6/6
Enable/disable built-in white led
* Only available when
"capability_daynight_illuminators_buil
tin_support > 0" and "whiteled" is
listed in "capability_daynight_
illuminators _builtin_type"
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
external_do_enabled
<boolean>
1/6
Enable/disable external led mounted
on do1
* Only available when
"capability_daynight_illuminators_ext
ernal_support > 0" and "do" is listed
in
"capability_daynight_illuminators_ext
ernal_interface".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
external_do<2~(capabili
ty_ndo)>_enabled
<boolean>
1/6
Enable/disable external led mounted
on do<
2~(capability_ndo)>
* Only available when "capability_ndo
> 1"
* Only available when
"capability_daynight_illuminators_ext
ernal_support > 0" and
"do<2~(capability_ndo)>" are listed in
"capability_daynight_illuminators_ext
ernal_interface".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
spectrum_mode
visible,
ir,
irenhanced,
6/6
Set spectrum method .
* We support this parameter when
the version number (httpversion) is
© 2019 VIVOTEK INC. All Right Reserved
93
blueenhanced
<product
dependent>
* Available values
are listed in
"capability_daynig
ht_illuminators
_spectrum_mode"
.
equal or greater than 0312a.
* Only available when
"capability_daynight_illuminators_
spectrum _support > 0".
7.11 Image Setting per Channel
Group: image_c<0~(n-1)> for n channel products and m profile
n denotes the value of "capability_nvideoin" and m denotes the value of
"capability_nvideoinprofile"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness
<Not
recommended to
use this>
-5~5,100 4/4 -5: Darker <-> 5: Bright
100: Use "
image_c<n>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1
* We replace "brightness" with
"brightnesspercent".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
contrast
<Not
recommended to
use this>
-5~5,100 4/4 -5: Less contrast <-> 5: More contrast
100: Use "
image_c<0~(n-1)>_contrastpercent"
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.
* We replace "contrast" with
"contrastpercent ".
* This parameter will not be used
after the version number (httpversion)