User Manual
Table Of Contents
- Overview
- Ready to Use
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- PTZ
- Mechanical PTZ Operation
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Shock detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Storage > Storage management
- Storage > Content management
- Appendix
VIVOTEK
152 - User's Manual
To remove a recording setting from the list, select a recording name from the drop-down list and
click
Delete
.
■ Click
recording (Name)
: Opens the Recording Settings page to modify.
■ Click
ON (Status)
: The Status will become
OFF
and stop recording.
■ Click
NAS (Destination)
: Opens the le list of recordings as shown below. For more information
about folder naming rules, please refer to page 130 for details.
20200210
20200211
20200212
If you want to enable recording notification, please click
Event
to configure event triggering
settings. Please refer to
Event > Event settings
on page 122 for more details.
When completed, select
Enable this recording
. Click
Save
to enable the setting and click
Close
to exit this page. When the system begins recording, it will send the recorded les to the network
storage. The new recording name will appear in the drop-down list on the recording page as shown
below.