Manualshelf

Quick Start Guide

ManualsBrandsVivotek ManualsVideoIP8172 Fixed
12345678910
EN - 8
Fine-tune the CS-Mount
7
The following applies only when you have troubles getting sharp images with particular
lens:
1. Detach the CS-mount lens from the camera body.
2. Use the supplied L-type hex key wrench to loosen the lens retention screw. When
done, the CS-mount adapter ring becomes rotatable.
3.UsearemovaltooltoturntheCS-mountadapterring;ne-tunethefocallength
between the sensor and the lens.
4.Whennished,tightenthelensretentionscrewtosecuretheCS-mountadapterring.
5. Attach the CS-mount lens back to the camera body.
1
2
3
Lens retention screw
CS-mount adapter ring