Specifications

VIVOTEK

User's Manual - 15

NOTE

When choosing the lens for your IP8162/62P, please notice the specications as below.

1.Flange back length (distance A-B) must be longer than 12.5mm. If the ange back

length is too short, the bottom of screw mount may hit the ICR, or result in out of focus

when adjusting the focus controller.

2.The screw mount (distance A-C) must be shorter than 4.5mm; in case that the bottom of

screw mount may hit the ICR.

3.The distance between the edge of lens (A) and front panel (D) must NOT be longer than

0.5mm; or, it may hit the front panel when adjusting the focus controller, or result in out of

focus.

0.5

sensor

A C

2 3

A (lens edge)

D (front panel)

ICR

NOTE: