Specifications

VIVOTEK
146 - User's Manual
eptz 0, <positive
integer>
0/7 A 32-bit integer, each bit can be set separately
as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
npreset 0, <positive
integer>
0/7 Number of preset locations.
protocol_https < boolean > 0/7 Indicate whether to support HTTP over SSL.
protocol_rtsp < boolean > 0/7 Indicate whether to support RTSP.
protocol_sip <boolean> 0/7 Indicate whether to support SIP.
protocol_maxconnectio
n
<positive integer> 0/7 The maximum allowed simultaneous
connections.
protocol_maxgenconne
ction
<positive integer> 0/7 The maximum general streaming
connections.
protocol_maxmegacon
nection
<positive integer> 0/7 The maximum megapixel streaming
connections.
protocol_rtp_multicast
_scalable
<boolean> 0/7 Indicate whether to support scalable
multicast.
protocol_rtp_multicast
_backchannel
<boolean> 0/7 Indicate whether to support backchannel
multicast.
protocol_rtp_tcp <boolean> 0/7 Indicate whether to support RTP over TCP.
protocol_rtp_http <boolean> 0/7 Indicate whether to support RTP over HTTP.
protocol_spush_mjpeg <boolean> 0/7 Indicate whether to support server push
MJPEG.
protocol_snmp <boolean> 0/7 Indicate whether to support SNMP.
protocol_ipv6 <boolean> 0/7 Indicate whether to support IPv6.
protocol_pppoe <boolean> 0/7 Indicate whether to support PPPoE.
protocol_ieee8021x <boolean> 0/7 Indicate whether to support IEEE802.1x.
protocol_qos_cos <boolean> 0/7 Indicate whether to support CoS.
protocol_qos_dscp <boolean> 0/7 Indicate whether to support QoS/DSCP.
protocol_ddns <boolean> 0/7 Indicate whether to support DDNS.
videoin_type 0, 1, 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_resolution <a list of available
resolution separated
by commas>
<product
dependent>
0/7 Available resolutions list.