Specifications

VIVOTEK
134 - User's Manual
autoiris 0~1 4/4 set 1 to enable auto iris, set 0 to disable auto iris
enableblc 0~1 4/4 Enable backlight compensation
5.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule
<product dependent>
6/6 Set IR cut control mode
daymodebegintime 00:00~23:59 6/6 Day mode begin time
daymodeendtime 00:00~23:59 6/6 Day mod end time
disableirled <boolean> 6/6 Enable/disable built-in IR led
(capability.ir > 0)
bwmode <boolean> 6/6 Switch to B/W in night mode if enabled
sensitivity low,
normal,
high
6/6 Sensitivity of light sensor
enableextled <boolean> 1/6 Enable/disable external IR led
(capability.extir > 0)
5.11 image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness <product dependent> 4/4 Adjust brightness of image according to mode settings.
saturation <product dependent> 4/4 Adjust saturation of image according to mode settings.
contrast -5 ~ 5 4/4 Adjust contrast of image according to mode settings.
sharpness <product dependent> 4/4 Adjust sharpness of image according to mode settings.
hue -5 ~ 5 4/4 Adjust hue of image according to mode settings.
mode preview,
restore,
save
7/4 Preview => Apply the parameters of image without
saving.
Restore => Restore the previous saved image
parameters.
Save => Directly save the adjust image parameters.