user manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Video
- Network > General settings
- Network > Streaming protocols 
- Network > SNMP (Simple Network Management Protocol)
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Digital input
- Applications > Tampering detection
- Recording > Recording settings 
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 191
URL Command Document for All SeriesIP8364
79
input.
(This must be present if
mjpeg_quant is equal to 99)
mjpeg_maxframe 1~25,
26~30 (only for 60Hz
CMOS)
Set maximum frame rate in fps
(for JPEG).
h264_intraperiod 250, 500, 1000, 2000, 3000,
4000
Intra frame period in
milliseconds.
h264_ratecontrolmode cbr, vbr cbr: constant bitrate
vbr: fix quality
h264_quant 99, 1~5 Quality of video when choosing
vbr in “h264_ratecontrolmode”.
99 is the customized manual
input setting.
1 = worst quality, 5 = best
quality.
h264_qvalue 0~51 Manual video quality level
input.
(This must be present if
h264_quant is equal to 99)
h264_bitrate 1000~8000000 Set bit rate in bps when
choosing cbr in
“h264_ratecontrolmode”.
h264_maxframe 1~25,
26~30 (only for 60Hz
CMOS)
Set maximum frame rate in fps
(for H264).