user manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout 
- System > Logs 
- System > Parameters 
- System > Maintenance
- Media > Image 
- Media > Video
- Media > Video
- Network > General settings
- Network > Streaming protocols 
- Network > SNMP (Simple Network Management Protocol)
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List 
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Digital input
- Applications > Tampering detection
- Recording > Recording settings 
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
138 - User's Manual
URL Command Document for All SeriesIP8364
26
1 => deny
ipv4list_i<0~9> Single address:
<ip address>
Network
address: <ip
address /
network mask>
Range
address:<start ip
address - end ip
address>
<blank>
6/6 IPv4 address list.
ipv6list_i<0~9> string[43]
<blank>
6/6 IPv6 address list.
7.7 video input
Group: videoin
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
cmosfreq 50, 60 60 4/4 CMOS frequency.
(capability.videoin.type=2)
whitebalance auto,
manual,
rbgain
auto 4/4 “auto” indicates auto white
balance.
“manual” indicates keep current
value.
“rbgain” indicates using rgain
and gbain.
exposurelevel 0~12 6 4/4 Exposure level
enableblc <boolean> 0 4/4 Enable backlight compensation.