user manual

VIVOTEK
146 - User's Manual
camctrl_httptunnelclie
nt
<boolean> 0/7 Indicate whether to support httptunnel
client.
camctrl_privilege <boolean> 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the Security
page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
uart_httptunnel <boolean> 0/7 Indicate whether to support HTTP tunnel
for UART transfer.
transmission_mode Tx,
Rx,
Both
0/7 Indicate transmission mode of the
machine: TX = server, Rx = receiver box,
Both = DVR.
network_wire <boolean> 0/7 Indicate whether to support Ethernet.
network_wireless <boolean> 0/7 Indicate whether to support wireless.
wireless_s802dot11b <boolean> 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot11g <boolean> 0/7 Indicate whether to support wireless
802.11g.
wireless_encrypt_wep <boolean> 0/7 Indicate whether to support wireless WEP.
wireless_encrypt_wpa <boolean> 0/7 Indicate whether to support wireless
WPA.
wireless_encrypt_wpa2 <boolean> 0/7 Indicate whether to support wireless
WPA2.
wireless_beginchannel 1 ~ 14 0/7 Indicate the begin channel of wireless
network
wireless_endchannel 1 ~ 14 0/7 Indicate the end channel of wireless
network
derivative_brand <boolean> 0/7 Indicate whether to support the upgrade
function for the derivative brand. For
example, if the value is true, the VVTK
product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)
npreset 0, <positive integer> 0/7 Number of preset locations
eptz 0, <positive integer> 0/7 A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or not.