Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
 
- Appendix
VIVOTEK
User's Manual - 195  
* Available value is 
listed in 
"capability_image_c
<0~(n-1)>_exposu
re_maxrange" 
* This parameter may also restrict image 
frame rate from sensor due to sensor 
generates a frame per exposure time. Ex: If 
this is set to 1/5s ~ 1/8000s and camera takes 
1/5s on the night, then sensor only outputs 5 
frame/s. 
* Only available when 
"capability_image_c<0~(n-1)>_exposure_m
axrange" != "-" 
* Only valid when "piris_mode"=manual or 
"irismode"=fixed 
* Only available when 
"capability_image_c<0~(n-1)>_exposure_ra
ngetype" is "twovalues". 
shuttervalue 
<product dependent>
<1~32000>, 
<5~32000>, 
<1~8000>, 
<5~8000>, 
etc. 
* Available value is 
listed in 
"capability_image_c
<0~(n-1)>_exposu
re_maxrange" 
4/4  Exposure time 
1~32000 => 1s ~ 1/32000s 
5~32000 => 1/5s ~ 1/32000s 
1~8000 => 1s ~ 1/8000s 
5~8000 => 1/5s ~ 1/8000s 
etc. 
* This parameter may also restrict image 
frame rate from sensor due to sensor 
generates a frame per exposure time. Ex: If 
this is set to 1/5s ~ 1/8000s and camera takes 
1/5s on the night, then sensor only outputs 5 
frame/s. 
* Only available when 
"capability_image_c<0~(n-1)>_exposure_m
axrange" != "-" and 
"capability_image_c<0~(n-1)>_exposure_ra
ngetype" is "onevalue". 
* We support this parameter when the version 
number (httpversion) is equal or greater than 
0302a. 
enableblc  <boolean>  4/4  Enable backlight compensation. 










