User Manual
Table Of Contents
- Overview
- Ready to Use
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 147
SD card control
■ Enable cyclic storage: Check this item if you want to enable cyclic recording. When the maximum
capacity is reached, the oldest le will be overwritten by the latest one.
■ Enable automatic disk cleanup: Check this item and enter the number of days you wish to retain a le.
For example, if you enter “7 days”, the recorded les will be stored on the SD card for 7 days.
Click
Save
to enable your settings.
Smart SD
Using Sony SD card Life expectancy feature in VIVOTEK's cameras
Flash memory cards have limited lifespan. If the card is used for a long period of time, at some
point, it will experience errors and data won't be recorded. VIVOTEK's Smart SD card with
Lifespan Notication safeguards against sudden stops of recording due to reaching to the limit
of rewriting cycles when it's time to be replaced.
The event messages look like the following:
Warning Error Message Examples
Normally Functioning The SD card is inserted and there is enough lifespan remaining.
Replacement Recommended Has reached 90% of the SD card's lifespan.
Has Reached its Lifetime All the spare blocks have been consumed. The card is read-only.
Card Not Inserted No SD card is inserted.
Failed to Get Status Unexpected error has occurred.