User Manual
Table Of Contents
- Overview
 - Accessing the Network Camera
 - Using VIVOTEK Recording Software
 - Using 3GPP-compatible Mobile Devices
 - Using RTSP Players
 - Main Page
 - Client Settings
 - Configuration
- System > General settings
 - System > Homepage layout
 - System > Logs
 - System > Parameters
 - System > Maintenance
 - Media > Image
 - Media > Video
 - Media > Video
 - Media > Video
 - Media > Audio
 - Network > General settings
 - Network > Streaming protocols
 - Network > SNMP (Simple Network Management Protocol)
 - Network > FTP
 - Security > User accounts
 - Security > HTTPS (Hypertext Transfer Protocol over SSL)
 - Security > Access List
 - PTZ > PTZ settings
 - Event > Event settings
 - Applications > Motion detection
 - Applications > Smart VCA
 - Applications > Tampering detection
 - Applications > Audio detection
 - Applications > Shock detection
 - Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
 - Recording > Recording settings
 - Local storage > SD card management
 - Local storage > Content management
 
 - Appendix
 
VIVOTEK
344 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
202 
PARAMETER  VALUE  SECURITY   
(get/set) 
DESCRIPTION 
preset_i<0~19>_pos  < W, H >  
<product 
dependent> 
1/4  Left-top corner coordinate of the preset. 
* Only available when 
"capability_fisheye" is 1 
1/7  Left-top corner coordinate of the preset. 
(It should be set by ePreset.cgi rather 
than by setparam.cgi.) 
preset_i<0~19>_size  <WxH> 
<product 
dependent> 
1/4  Width and height of the preset. 
* Only available when 
"capability_fisheye" is 1 
1/7  Width and height of the preset. 
(It should be set by ePreset.cgi rather 
than by setparam.cgi.) 
7.37 Focus Window Setting 
Group: focuswindow_c<0~(n-1)> for n channel products 
n denotes the value of "capability_nvideoin".   
(capability_image_c<0~(n-1)>_focuswindow_nwindow > 0) 
PARAMETER  VALUE  SECURITY   
(get/set) 
DESCRIPTION 
win_i0_enable  <boolean>  4/4  Enable or disable the window. 
win_i0_home  < W, H >  
<product 
dependent> 
4/4  Left-top corner coordinate of the 
window. 
* If the minimal window size is 192x144, 
then the 
"win_i0_home"=(0~resolution_W-192, 
0~resolution_H-144), resolution_W and 
resolution_H based on 
"capability_image_ 
c<0~(n-1)>_focuswindow_range" . 
win_i0_size  <WxH> 
<product 
dependent> 
4/4    Width and height of the window. 
* The minimal window size is 192x144, 
and resolution_W and resolution_H is 
based on "capability_image_ 
c<0~(n-1)>_focuswindow_range" . 










