User Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > PIR (FD9167)
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 27
NOTE:
1
2
The "T" models comes with a motorized focus lens. Use the Focus function to zoom and
tune to a best focus. From a web console, open the firmware configuration page. Enter the
Configuration > Media > Image > Focus page. You will see a live stream on screen. If pre-
ferred, you can zoom in on the scene. Use the “Perform Auto Focus” function to automati-
cally tune to a best image focus. Check the live view to ensure the image is in focus.
16. Install the dome cover.