User Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > PIR (FD9167)
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
26 - User's Manual
14. According to the live view, adjust the shooting direction.
13. Loosen, but not completely remove, the retention screws on the camera to adjust the
camera’s shooting direction. You can pan, tilt, or rotate the camera lens module.
350°
180°
80°
15. Tighten the retention screws when you are statisfied with the field of view.
Fixed lens models: FD9167-H, FD9367-HV
have a tilt angle up to 70°. If tilted beyond 70°, IR
reection may occur.
Motor lens models:
FD9167-HT, FD9367-HTV, or FD9367-EHTV
can tilt up to 80°.