User`s manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- PIR
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
194 - User's Manual
media_snapshot_maxpreevent <positive
integer>
0/99 Maximum snapshot number before
event occurred.
media_snapshot_maxpostevent <positive
integer>
0/99 Maximum snapshot number after
event occurred.
media_videoclip_maxsize <positive
integer>
0/99 Maximum size (KB) of a videoclip.
media_videoclip_maxlength <positive
integer>
0/99 Maximum length (second) of a
videoclip.
media_videoclip_maxpreevent <positive
integer>
0/99 Maximum duration (second) before
event occurred in a videoclip.
image_wdrc <Boolean> 0 0/99 Indicate whether to support WDR
enhanced.
image_ iristype <string> piris 0/99 Indicate iris type.
image_ focusassist <Boolean> 0 0/99 Indicate whether to support focus
assist.
adaptiverecording <boolean> 1 0/99 Indicate whether to support
adaptive recording.
adaptivestreaming <boolean> 1 0/99 Indicate whether to support
adaptive streaming.
remotecamctrl_master 0, <positive
integer>
0 0/99 Indicate whether to support
remote auxiliary camera (master
side), this value means supporting
max number of auxiliary camera.
remotecamctrl_slave <boolean> 0 0/99 Indicate whether to support
remote camera control (slave
side).
supportsd <boolean> 1 0/99 Indicate whether to support local
storage.
fisheye <Boolean> 0 0/99 Indicate fisheye model.