User`s manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- PIR
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
188 - User's Manual
<positive
integer>
naudioin 0,
<positive
integer>
1 0/99 Number of audio inputs.
naudioout 0,
<positive
integer>
1 0/99 Number of audio outputs.
nvideoin <positive
integer>
1 0/99 Number of video inputs.
nvideoout <positive
integer>
1 0/99 Number of video outputs.
nmediastream <positive
integer>
3 0/99 Number of media stream per
channels.
nvideosetting <positive
integer>
3 0/99 Number of video settings per
channel.
naudiosetting <positive
integer>
1 0/99 Number of audio settings per
channel.
nuart 0,
<positive
integer>
0 0/99 Number of UART interfaces.
nvideoinprofile <positive
integer>
1 0/99 Number of video input profiles.
nmotion 0, <positive
integer>
3 0/99 Number of motion window.
nmotionprofile 0, <positive
integer>
1 0/99 Number of motion profiles.
ptzenabled 0, <positive
integer>
0 0/99 An 32-bit integer, each bit can be
set separately as follows:
Bit 0 => Support camera control
function;
0(not support), 1(support)
Bit 1 => Built-in or external
camera;
0(external), 1(built-in)
Bit 2 => Support pan operation,
0(not support), 1(support)
Bit 3 => Support tilt operation;
0(not support), 1(support)
Bit 4 => Support zoom operation;