User`s manual

VIVOTEK
User's Manual - 175
7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule
auto 6/6 Set IR cut control mode
sir <boolean> 0 4/4 Enable/disable Smart IR
daymodebegintime 00:00~23:59 07:00 6/6 Day mode begin time
daymodeendtime 00:00~23:59 18:00 6/6 Day mod end time
enableextled <boolean> 0 1/6 Enable/disable external IR led
(capability.extir > 0)
bwmode <boolean> 1 6/6 Switch to B/W in night mode if
enabled
sensitivity low,
normal,
high
normal 6/6 Sensitivity of light sensor
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of image according
to mode settings.
saturation -5~5,100 0 4/4 Adjust saturation of image according
to mode settings.
100 for saturation percentage mode.
saturationpercent 0~100 50 4/4 Adjust saturation value of percentage
when saturation=100
contrast -5 ~ 5 0 4/4 Adjust contrast of image according to
mode settings.
sharpness -3~3,100 0 4/4 Adjust sharpness of image according
to mode settings.
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of percentage
when sharpness=100