User`s manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- PIR
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 171
“ratecontrolmode”.
s<0~(m-1)>_mjpeg_maxvb
rbitrate
1000~"capabili
ty_videoin_c<
n>_mjpeg_ma
xbitrate"
40000000 1/4 The maximum allowed bit rate
in fixed quality mode.
When the bit rate exceeds this
value, frames will be dropped to
restrict the bit rate.
* Only valid when
"ratecontrolmode"= vbr
s<0~(m-1)>_mjpeg_maxfra
me
1~50,
51~60 (only
for NTSC or
60Hz CMOS)
10 1/4 Set maximum frame rate in fps
(for JPEG).
5M : 1~13fps
3M : 1~20fps
2M : 1~30fps
1080P : 1~30fps
720P : 1~60fps
(for NTSC or 60Hz CMOS)
wdr_mode 0~1 1 1/4 Turning WDR Pro on or off.
0: off
1: on
wdr_strength 0~2 1 1/4 The strength of WDR Pro.
0: low
1: medium
2: high
flickerless 0~1 0 1/4 Turn on(1) or turn off(0) the
flickerless mode