User`s manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- PIR
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 13
Focus window
To adjust the zoom factor and focus range
1� The camera comes with a motorized vari-focal
lens module� With a web console, you can
enter the Configuration > Media > Image >
Focus page to tune the image zoom and focus�
3. You may also push the Auto Focus & Zoom
buttons on the camera to obtain the same
results especially when you are using camera
tester for onsite adjustment�
2� On this page, you can pull the Zoom and
Focus pointers, set up a Focus window,
and use the Perform auto focus button to
automatically obtain an optimal focus result�
You may also manually fine-tune zoom and
focus using the various functional buttons�
Please refer to your User Manual for more
information�