User`s manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- PIR
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
114 - User's Manual
■ VADP
It is presumed that you already uploaded and enabled the VADP modules before you can
associatee VADP triggers with an Event setting�
Click on the Set VADP Trigger button to open the VADP setup menu� The triggering conditions
available with 3rd-party software modules known as VADP will be listed� Use the arrow buttons to
select these triggers� Users may implant these modules for different purposes such as triggering
motion detection, or applications related to video analysis, etc� Please refer to page 132 for the
conguration options with VADP modules.
Once the triggers are congured, they will be listed under the VADP option.