User`s manual

EN - 12
1. Install the black cover.
2. Attach the dome cover to the camera by combining it to the retainer and aligning with the mounting
holes.
3. Secure the four dome screws with the supplied hex key wrench. Make sure all parts of the camera
are securely installed.
Completion
8
2
1
3
3
Black
Cover
NOTE:
You will nd a moisture absorber bag attached
to the dome cover. Replace the moisture absorber
included in the camera with the one shipped within the
accessory bag.
W
T
8
N
To adjust the zoom factor and focus range
1. Loosen the zoom controller and then adjust zoom factor by moving the controller left
and right. Upon completion, tighten the zoom controller screw.
2. Loosen the focus controller and then adjust focus range by moving the controller left
and right. Upon completion, tighten the focus controller screw.